 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Hubble Control And Data Systems Reactivated
Greenbelt MD (SPX) Oct 24, 2008 The Hubble Space Telescope Science Instrument Control and Data Handling system was reactivated on Thursday, October 23. This should enable Wide Field Planetary Camera-2 science observations to resume on Saturday, October 25. The Advanced Camera for Surveys Solar Blind Channel science observations should resume later next week.
Additional background The review team primarily studied the sudden halt of the NASA Standard Spacecraft Computer-1 which occurred on October 16, along with the apparent failure during turn-on of the planetary camera's low voltage power supply earlier that same day. The team concluded that a hardware problem did not occur on the camera. The anomaly was because of a limit-checking algorithm that triggered before the data that it was checking was valid. A commanding change on the instrument will eliminate this condition and both teams expect a nominal low voltage power supply turn-on when it is commanded on next week. Regarding the sudden halt of the spacecraft computer, the team concluded that three separate events occurring with near-simultaneity were responses to a single triggering event. The triggering event was most likely caused by a self-clearing short-circuit, or a transient open-circuit, in the Science Instrument Control and Data Handling system. One or more such events would not be highly improbable in hardware inactive since 1990, and will not harm the telescope, although it could cause another interruption of science operations. Based on these latest findings, Goddard Center management and NASA HQ concurred with the Hubble team's plan to power on the spacecraft computer and then monitor it for about 24-hours to assess its operations. Another status report will be issued following resumption of planetary camera science on Saturday. Related Links Hubble News Space Telescope News and Technology at Skynightly.com
Hubble Engineers Trying To Nut Out Anomalies
Greenbelt MD (SPX) Oct 22, 2008On Monday, October 20, engineers at NASA's Goddard Space Flight Center met to discuss their next steps toward resolving two anomalies which caused the B-side of the Science Instrument Control and Data Handling System (SI C and DH-B) and the Advanced Camera for Surveys (ACS) Solar Blind Channel (SBC) to return to a 'safe hold' status on October 16. |
|
|
| The content herein, unless otherwise known to be public domain, are Copyright Space.TV Corporation. AFP and UPI Wire Stories are copyright Agence France-Presse and United Press International. ESA Portal Reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space.TV Corp on any Web page published or hosted by Space.TV Corp. Privacy Statement |
