Solar Energy News  
SOLAR DAILY
Scientists develop perovskite solar modules with greater size, power and stability
by Staff Writers
Onna, Japan (SPX) Jan 28, 2021

Perovskite solar cell devices require multiple layers to function. The active perovskite layer absorbs sunlight and generates charge carriers. The transport layers transport the charge carriers to the electrodes, releasing a current. The active perovskite layer is formed from many crystal grains. The boundaries between these grains, and other defects in the perovskite film, such as pinholes, lower the efficiency and lifespan of the solar devices.

Researchers from the Okinawa Institute of Science and Technology Graduate University (OIST) have created perovskite solar modules with improved stability and efficiency by using a new fabrication technique that reduced defects. Their findings were published on the 25th January in Advanced Energy Materials.

Perovskites are one of the most promising materials for the next-generation of solar technology, soaring from efficiencies of 3.8% to 25.5% in slightly over a decade. Perovskite solar cells are cheap to produce and have the potential to be flexible, increasing their versatility. But two obstacles still block the way to commercialization: their lack of long-term stability and difficulties with upscaling.

"Perovskite material is fragile and prone to decomposition, which means the solar cells struggle to maintain high efficiency over a long time," said first author Dr. Guoqing Tong, a postdoctoral scholar in the OIST Energy Materials and Surface Sciences Unit, led by Professor Yabing Qi. "And although small-sized perovskite solar cells have a high efficiency and perform almost as well as their silicon counterparts, once scaled up to larger solar modules, the efficiency drops."

In a functional solar device, the perovskite layer lies in the center, sandwiched between two transport layers and two electrodes. As the active perovskite layer absorbs sunlight, it generates charge carriers which then flow to the electrodes via the transport layers and produce a current.

However, pinholes in the perovskite layer and defects at the boundaries between individual perovskite grains can disrupt the flow of charge carriers from the perovskite layer to the transport layers, reducing efficiency. Humidity and oxygen can also start to degrade the perovskite layer at these defect sites, shortening the lifespan of the device.

"Scaling up is challenging because as the modules increase in size, it's harder to produce a uniform layer of perovskite, and these defects become more pronounced," explained Dr. Tong. "We wanted to find a way of fabricating large modules that addressed these problems."

Currently, most solar cells produced have a thin perovskite layer - only 500 nanometers in thickness. In theory, a thin perovskite layer improves efficiency, as the charge carriers have less distance to travel to reach the transport layers above and below. But when fabricating larger modules, the researchers found that a thin film often developed more defects and pinholes.

The researchers therefore opted to make 5 x 5 cm2 and 10 x 10 cm2 solar modules that contained perovskite films with double the thickness.

However, making thicker perovskite films came with its own set of challenges. Perovskites are a class of materials that are usually formed by reacting many compounds together as a solution and then allowing them to crystallize.

However, the scientists struggled to dissolve a high enough concentration of lead iodine - one of the precursor materials used to form perovskite - that was needed for the thicker films. They also found that the crystallization step was fast and uncontrollable, so the thick films contained many small grains, with more grain boundaries.

The researchers therefore added ammonium chloride to increase the solubility of lead iodine. This also allowed lead iodine to be more evenly dissolved in the organic solvent, resulting in a more uniform perovskite film with much larger grains and fewer defects. Ammonia was later removed from the perovskite solution, lowering the level of impurities within the perovskite film.

Overall, the solar modules sized 5 x 5 cm2 showed an efficiency of 14.55%, up from 13.06% in modules made without ammonium chloride, and were able to work for 1600 hours - over two months - at more than 80% of this efficiency.

The larger 10 x 10 cm2 modules had an efficiency of 10.25% and remained at high levels of efficiency for over 1100 hours, or almost 46 days.

"This is the first time that a lifespan measurement has been reported for perovskite solar modules of this size, which is really exciting," said Dr. Tong.

This work was supported by the OIST Technology Development and Innovation Center's Proof-of-Concept Program. These results are a promising step forward in the quest to produce commercial-sized solar modules with efficiency and stability to match their silicon counterparts.

In the next stage of their research, the team plans to optimize their technique further by fabricating the perovskite solar modules using vapor-based methods, rather than by using solution, and are now trying to scale up to 15 x 15 cm2 modules.

"Going from lab-sized solar cells to 5 x 5 cm2 solar modules was hard. Jumping up to solar modules that were 10 x 10 cm2 was even harder. And going to 15 x 15 cm2 solar modules will be harder still," said Dr. Tong. "But the team is looking forward to the challenge."

Research paper


Related Links
Okinawa Institute Of Science And Technology (Oist) Graduate University
All About Solar Energy at SolarDaily.com


Thanks for being here;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Contributor
$5 Billed Once


credit card or paypal
SpaceDaily Monthly Supporter
$5 Billed Monthly


paypal only


SOLAR DAILY
Squeezing a rock-star material could make it stable enough for solar cells
Stanford CA (SPX) Jan 25, 2021
Among the materials known as perovskites, one of the most exciting is a material that can convert sunlight to electricity as efficiently as today's commercial silicon solar cells and has the potential for being much cheaper and easier to manufacture. There's just one problem: Of the four possible atomic configurations, or phases, this material can take, three are efficient but unstable at room temperature and in ordinary environments, and they quickly revert to the fourth phase, which is completel ... read more

Comment using your Disqus, Facebook, Google or Twitter login.



Share this article via these popular social media networks
del.icio.usdel.icio.us DiggDigg RedditReddit GoogleGoogle

SOLAR DAILY
Abandoned cropland should produce biofuels

New biodegradable polyurethane foams are developed from wheat straw

The road to future zero emissions demands a new form of ammonia production

Lab-grown plant tissue could ease toll of logging and agriculture

SOLAR DAILY
How will seafarers fare once automated ships take over

US leading race in artificial intelligence, China rising: survey

Squid-inspired robot swims with nature's most efficient marine animals

Designing customized "brains" for robots

SOLAR DAILY
Deutsche WindGuard unlocks complex wind sites with ZX Lidars

Wind powers more than half of UK electricity for first time

ACWA Power signs three agreements for the first foreign investment based independent wind power project in Azerbaijan

Norway launches major wind power research centre

SOLAR DAILY
How to get more electric cars on the road

VW misses EU emissions target despite e-cars boost

Volta Trucks set to launch urban electric lorry

EVgo latest in hot US electric auto sector to publicly list

SOLAR DAILY
Inexpensive battery charges rapidly for electric vehicles

Highly efficient grid-scale electricity storage at fifth of cost

Could "Power Walking" fuel an energy revolution

Nano-thin piezoelectrics advance self-powered electronics

SOLAR DAILY
Nuclear physicist takes a voyage towards a mythical island

Atomic design for a carbon-free planet

Framatome and BHI Energy to provide safety systems at US nuclear plant

Bulgaria scraps plan for new nuclear plant

SOLAR DAILY
BlackRock pushes companies to set more ambitious climate targets

Rich nations 'hugely exaggerate' climate finance: study

China to launch carbon emissions trading scheme next month

Dozens of nations miss deadline to boost climate ambition

SOLAR DAILY
Oak trees take root in Iraqi Kurdistan to help climate

Forests may flip from CO2 'sink' to 'source' by 2050

Forest loss 'hotspots' bigger than Germany: WWF

2020 another grim year for Brazilian Amazon









The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us.